Does your drawer microwave look out of place and unfinished?  Our trim kits for drawer microwaves are designed to fill in any unsightly gaps and add the finishing touch to your kitchen.  Keep reading for everything you need to know about measuring for, ordering, and installing a drawer microwave trim kit.

About our Drawer Microwave Trim Kits

Let's dive into some details regarding drawer microwaves and our trim kits.  Drawer microwaves are wonderful appliances which free up valuable countertop space, but getting them to fit existing (or even new) cabinets can be a challenge.  Our custom trim kits are designed to give your drawer microwave the built-in look you're after.

What's included:  Each drawer microwave trim kit contains hardware to raise/center the microwave in the opening, brackets to secure it so it doesn't shift during use, and a decorative front trim piece to hide the gaps and provide a built-in look.  

Depth:  Our kits for drawer microwaves are 15/16" deep.   Some drawer microwaves have flip down control panels and this depth ensures easy access to these panels.  

Material:  Our kits are all metal except for the plastic mounting brackets at each corner.  

Ventilation:  Drawer microwaves typically ventilate through the front and therefore a trim kit will not impede air flow.  That being said, our kits to incorporate a 1/2" slot around the perimeter which provides for ample ventilation just to provide added protection.

Installation:  Installation typically takes only about 15 minutes and requires only a screwdriver.  All mounting hardware is included, along with detailed video instructions.

Other features:  Our unique corner brackets allow for simple removal of the kit should it ever be required.  Simply press the tab on the corner and the face plate slides out of the clips.  To re-install, simply slide the face frame back into place.  

How to Measure:

1. Find the Make and Model of Your Microwave

To ensure accuracy, locate and record the make and model of your microwave. It's important to provide the actual model number, not just the microwave description (e.g. SHARP SMD2470ASY  vs.  24 Inch Microwave Drawer with 1.2 cu. ft. Capacity).  To locate the model number, check the front and back for identification markings or labels. If needed, consult the user manual or your receipt.  

2. Measure the Width of the Opening

Using a tape measure, measure the width of the cabinet cut-out from inside to inside. Record the measurement to the nearest 1/16" (e.g.  22-7/16").

3. Measure the Height of the Opening

Measure the height of the cabinet cut-out opening from the bottom to the top. Record the measurement to the nearest 1/16" (e.g. 16-3/8")

4. Measure the Depth of the Opening

Extend the tape measure into the opening, touching the back cabinet wall. Measure from there to the face of the cabinet and record the measurement to the nearest 1/16" (e.g. 23-7/8").

5. Determine the Outside Height of the Trim Kit

Provide the overall height of the trim kit (to the nearest 1/16").  For example, if your cabinet is cutout is 17" tall and you want the trim kit to overlap the opening by 1-1/4" on the top and bottom, you will specify and overall outside height of 19-1/2" (e.g. 17 + 1.25 + 1.25 = 19.5).  

6.  Determine the Width of the Kit

Similar to the height, provide the overall width of the trim kit (to the nearest 1/16").  For example, if you may have a drawer below the microwave that is 29-1/2" wide you'd like to match.  You would enter an overall width of 29-1/2".  

7.  Lastly, determine if your cabinet has a "lip" on the bottom

In order to manufacture the risers to the correct height, we will need to know whether your cabinet has a "lip" on the bottom.  The pictures below may be useful in explaining what we mean by lip.  

Once you know these details, you can use our online order form to complete your order as well as upload a photo of your cabinet.  We review each order thoroughly prior to fabrication and will reach out with any questions or concerns.  

Frequently Asked Questions:

I'm concerned about accurate measurements and the perfect fit. Can you assist me?

We completely understand and are here to help. We recommend starting by watching our "how to measure" video or checking out this more detailed "how to measure" post. If you still have questions, feel free to reach out to us via text or call at any time.

What are the available finishes?

Currently, our drawer microwave trim kits come in brushed stainless, black, and graphite.

What if it doesn't fit?

In the event that your drawer microwave trim kit doesn't fit, please let us know, and we will gladly exchange it for a new kit or provide a full refund, depending on your preference.

What about ventilation?

As mentioned above, most drawer microwave achieve ventilation through the front, but for added protection our kit comes with a standard 1/2" slot around the entire perimeter, ensuring sufficient ventilation.

Does your kit include a way to raise the microwave, centering it in the opening?

Yes, aach kit includes the necessary components to raise the microwave and center it perfectly in the opening.

Are your kits made of metal or plastic?

Each drawer microwave trim kit is made of high-quality metal with sturdy plastic brackets at each corner.

There you have it! With our custom trim kits, transforming your drawer microwave into the 'built-in' look has never been easier. Installation is simple and can be done in 15 minutes or less with only a screwdriver. If convenience and style are what you're after, our trim kits have got you covered - so don't wait any longer! Order your customized trim kit today and upgrade even the most mundane of spaces in no time!

Click here to shop Trim Kits for Drawer Microwaves

Tags:

GE CWL112P2RS1 Trim Kit, GE ZWL1126SRSS Trim Kit, Km md 1ss Trim Kit, Kutch KMD24S Trim Kit, SHARP KB-6524PS Trim Kit, Sharp SMD2470ASYE Trim Kit, SHARP SMD2489ES Trim Kit, SHARP SMD3070ASY Trim Kit, THOR TMD2401 Trim Kit, VIKING VMOD5240SS Trim Kit, Wolf MD24TE/S Trim Kit, XO XOMWD24S Trim Kit, Z line MWD-1 Trim Kit